Snap Pac

The WMB Snap Pac is a custom fit case for live performances that need quick access to wireless or wired equipment and offer secure attachment to a personal belt, instrument strap, or stand.

The WMB Snap Pac is made with Dri-Prene, an athletic industry fabric-covered foam with the softness and elasticity of rubber, that’s durable and machine washable. A single snap fastener will keep the wireless unit secure and closing both snaps gives the freedom to place in any orientation.

The Snap Pac has attachment options to fit any performance situation, including fabric belt loops, a non-slip elastic strap, or a quick plastic belt clip.  Each Snap Pac includes a Cable Disc that can be used to maintain any desired cable length for wired earbuds or instrument mics and ensure that your performance is setup for success.

Frequently Asked Questions

The Snap Pac is a quick-access performance case designed for gear that needs to stay within reach during a show, like an IEM/IFB receiver, a DPA 4099 instrument microphone, or a smartphone. Unlike the Belt Pac, which holds a bodypack transmitter securely in a closed pouch, the Snap Pac uses plastic snap fasteners that allow fast, clean access to volume controls, power switches, or the device itself during performance. The Snap Pac is for gear you need to get into quickly; the Belt Pac is designed for gear you want to secure and forget.

Most Snap Pacs come with three attachment options to choose from at the time of purchase: a bi-directional fabric belt loop for personal or WMB belts, a silicone-backed elastic strap for non-slip attachment to instrument straps, mic stands, or chairs, or a quick plastic belt clip for fast placement without a belt.

Yes, and that is specifically what the silicone-backed elastic strap attachment option is designed for. The elastic strap on the back of the Snap Pac wraps around a guitar or instrument strap and the silicone backing grips the surface to prevent sliding during use. This keeps the transmitter or IEM receiver at a consistent position on the strap without requiring a separate belt, which is a practical solution for musicians who need their receiver accessible during performances. The built-in elastic strap works well with instrument straps that are 2-4 inches wide.

The Snap Pac for IEM/IFB is designed to fit the Shure ADXR or P10R, the Sennheiser Spectera or EK series, and the Wisycom MPR50. The interior dimensions are 4"H x 2.75"W x 0.8"D. The snap fasteners are positioned to allow access to volume knobs and power or mute switches while the receiver is inside the pac, so performers do not need to remove it to make adjustments during a show.

The Snap Pac fits snugly around the receiver and the snap fasteners secure it in position, preventing clothing or other contact from brushing against the volume knob during movement. Unlike an open belt clip or a loose pocket, the Snap Pac keeps the receiver contained and consistently oriented, reducing the chance of accidental adjustments. The snap design also allows intentional, deliberate access when a performer genuinely needs to make an adjustment.

The Snap Pac for Smartphone fits phones up to an iPhone Plus size, including most slim and MagSafe cases. Very thick or bulky protective cases may be too large, so if in doubt, measure the widest point of your phone with its case before ordering. The interior dimensions for the Smartphone case are 6.5"H x 3"W x 0.8"D. The two plastic snap fasteners can open quietly, which makes the pac practical for use on set or in backstage environments where noise matters.

The Snap Pac for DPA 4099 stores the mic safely and within reach when it is not clipped to an instrument, such as during setup changes, between songs, or while traveling between rehearsal spaces. The plastic snap fasteners can be closed around any of the DPA instrument clips to keep the mic secure inside the case. The included Stand Strap uses silicone-backed elastic to attach the Snap Pac to a music stand, chair, or other stage equipment so the mic stays accessible throughout the set.

The Stand Strap is a silicone-backed elastic strap that wraps around a music stand, chair back, boom arm, or other stage furniture and grips without slipping. Once attached, the Snap Pac loops or clips onto the Stand Strap so the DPA 4099 sits in a consistent, accessible position throughout a performance. The included Cable Disc manages the slack in the XLR cable, setting the available length to match the performer's exact needs without excess cable underfoot.

Yes. Every Snap Pac includes a Cable Disc, which is a low-profile hook-and-loop cable organizer writable with Sharpie or permanent marker. For the IEM/IFB and Smartphone models, the Cable Disc manages earbud or wired cable length. For the DPA 4099 model, it stores excess cable and sets the usable length to the performer's needs. The DPA 4099 version also includes a Stand Strap for attaching to stage equipment.

Yes. The Snap Pac is made with Dri-Prene, the same fabric-covered TPE foam used across the WMB lineup, which is durable, moisture-resistant, and machine washable. Wash on a gentle cycle in cold water with mild detergent and air dry only; do not put in the dryer. The plastic snap fasteners are not affected by machine washing.